Maxmech Surface Water Pump 0.5HP Copper MQB-60

Description

Maxmech Surface Water Pump 0.5HP Copper MQB-60

• Maxmech: This is the brand, known for producing a range of power tools and machinery, often balancing affordability with functionality in the Kenyan market.
• Surface Water Pump: This indicates that the pump is designed to be installed above the water source (e.g., a tank, shallow well, or reservoir). It draws water up through a suction pipe. It is not a submersible pump.
• 0.5HP (Horsepower): This is the motor’s power output, equivalent to approximately 370 Watts (0.37 kW). This is a very common entry-level power for household water boosting, filling overhead tanks, and small garden irrigation.
• Copper (Winding): This is a crucial and desirable specification. It refers to the material used for the motor’s internal windings.
  • Benefits of Copper Windings:
    • Higher Electrical Conductivity: Copper is an excellent conductor of electricity, resulting in lower electrical resistance compared to aluminum.
    • Greater Efficiency: Due to lower resistance, copper-wound motors are generally more energy-efficient. This means less energy is wasted as heat, leading to lower running costs.
    • Lower Heat Generation: Less resistance means less heat is produced during operation, which helps prevent overheating and significantly extends the motor’s lifespan.
    • Durability & Longevity: Copper is more durable, resistant to corrosion, and less prone to oxidation than aluminum. This translates to a longer operational life for the motor, especially in conditions that might involve moisture or prolonged use.
    • Higher Power Density: Copper’s superior conductivity allows for a more compact motor design for the same power output.
• MQB-60: This is likely the specific model designation within the Maxmech lineup. The “QB-60” part often refers to a “peripheral” or “regenerative” pump type. These pumps are characterized by:
  • A brass impeller with radial peripheral vanes.
  • Their ability to generate relatively high head (pressure) at a lower flow rate compared to centrifugal pumps of similar horsepower.

Typical Performance Specifications (for a 0.5HP QB-60 type pump):

• Maximum Head (Vertical Lift): Typically ranges from 28 to 35 meters. This is the maximum vertical height the pump can push water.
• Maximum Suction Lift: Around 7 to 8 meters. This is the maximum vertical distance the pump can draw water up from the source to the pump’s inlet. For optimal performance, always keep the suction lift as short as possible.
• Maximum Flow Rate: Usually between 25 to 35 liters per minute (L/min), or roughly 1,500 to 2,100 liters per hour. This is a moderate flow suitable for single-family homes.
• Inlet/Outlet Size: Commonly 1 inch x 1 inch.
• Voltage: Single-phase 220V-240V AC (50Hz), suitable for standard household electrical outlets in Kenya.
• Impeller Material: Often brass for durability.
• Pump Body: Typically cast iron (the “copper” refers specifically to the motor windings, not the pump casing).
• IP Protection: Usually IP44 (splash-proof, suitable for protected outdoor or indoor use).

Common Applications:

• Boosting water pressure in homes (from a storage tank).
• Transferring water from ground-level tanks, shallow wells, or boreholes to overhead tanks.
• Small-scale garden irrigation.
• Filling domestic water storage.